Accuracy grade: ± 10.0 µm.

Output signal: Square-wave signals, TTL levels.

Reference mark position: Distance-coded.

Power supply: 5 V (+-10 %).

Electrical connection: D-sub connector, metalized plastic housing, 2-row, with locking screws, male, 9-pin.

Cable length: 6.00 m.

Measuring length: 99 mm.

Accuracy grade: ± 10.0 µm.

Grating period: 20.000 µm.

Output signal: Square-wave signals, TTL levels with 1-fold interpolation, non-clocked.

Reference mark position: Distance-coded reference marks with nominal increment 1000 x grating period.

Seal type: NBR sealing lip.

Power supply: 5 V (+-10 %).

Minimum edge separation: 3.300 µs.

Fault detection signal: OS.

Reference pulse width: 90 °.

Limit switch: without.

Connecting direction: Cable outlet right.

Cable length: 6.00 m.

Electrical connection: D-sub connector, metalized plastic housing, 2-row, with locking screws, male, 9-pin.

Pin configuration: D1301752.

Cable type: PUR Ø 4.3 mm with armor Ø 7.3 mm.

Special characteristics, linear encoder: End blocks not sealed.